Services
Under-Cabinet Lighting Installation in Queen Creek Kitchens
Hardwired LED under your uppers, with the driver and the wire hidden. Even light on the counter, no dots, and no cord running down the tile.
Why it matters
Stick-on strips are why a nice kitchen looks unfinished.
The counter is where you actually work. Ceiling cans put your own shadow on the cutting board, because the light comes from behind you. Under-cabinet light puts it on your hands.
The kits in a box look fine the first week. Then a cord runs down the backsplash, the tape lets go in the summer heat, and half the run reads dimmer than the other half.
We hardwire instead. The tape sits in an aluminum channel with a frosted lens, the driver hides inside a cabinet, and one switch on the wall runs the whole kitchen.
What's included
What a hardwired kitchen run includes.
We plan the run around your cabinet layout and the way you cook. Then we build it in, so the parts that make it work never show.
Tape in an aluminum channel
A frosted lens blends the diodes into one line. No dotting, no dark bands, and the channel pulls heat off the tape.
Pucks or bars where they fit better
Pucks suit a glass display cabinet. Bars are simple on a short run and easy to wipe down.
Hidden driver and wire
The driver tucks into a cabinet or the soffit. Nothing runs down the backsplash.
A lighting circuit, not the counter circuit
Kitchen counter outlets are not allowed to feed lights, so the run ties into a lighting circuit.
A dimmer that matches the driver
Bright for prep, low for late at night. We pair the two parts so the low end doesn't flicker or buzz.
Color temperature you pick
We hold samples against your counter. 2700K reads warm on wood, and 3000K to 3500K looks cleaner on white quartz.
Front-edge mounting
The strip sits toward the front of the cabinet, so light lands on the counter instead of glaring off the tile.
Wire run during a remodel
If the cabinets are coming out anyway, we pull the wire at rough-in. Nothing has to be fished later.
How it works
From first call to final walkthrough.
Garrison and Josh handle every project themselves, treat your home like their own, and keep you informed at every step.
- 01
Step One
Reach Out
Call or email us. Tell us about your project and we set a time that works for you.
Garrison: (480) 283-5007 · Josh: (480) 749-1384
- 02
Step Two
Get a Clear Estimate
We walk your project in person and price it before any work starts. No hidden fees, no surprise add-ons.
- 03
Step Three
We Get to Work
From a single fixture to a full custom wiring job, you get updates at every key stage.
- 04
Step Four
Final Walkthrough
We walk you through the finished work, answer every question, and leave your home spotless.
- 05
The Payoff
Saddle Up Rewards
Refer a friend who books a service and earn a $50 to $100 Amazon gift card as our thank you.
Why choose us
Even light is the whole job here.
“Needed a sconce put up in my bathroom, they did it in genuinely 10 minutes. Will be bringing them back.”
Channel work you can see the result of
The lens and the mounting matter more than the strip. That is the difference between built in and stuck on.
Dimming that behaves
Driver and dimmer get matched on purpose, and we set the low end by hand before we leave.
Cabinets stay clean
No cords, no visible screws, and no adhesive left on the finish.
One price up front
You see the full quote before we cut into anything.
FAQ
The questions homeowners ask us first.
Something we didn't cover? Call (480) 283-5007 and we'll walk you through it personally.
Yes. We fish the wire through the wall and the cabinet bays, and we patch anything we have to open. Most kitchens take a day.
Ready when you are
Experience the Southern Circuit Co. difference.
Wiring a custom build, planning a high-end remodel, or adding the lighting that finishes a space? Send the details and get a free, no-obligation estimate from the owners themselves.
Garrison (480) 283-5007 · Josh (480) 749-1384· Licensed & insured · Queen Creek, AZ