Services
Landscape and Exterior Lighting Installation in Queen Creek
Path lights, uplighting on the palms and saguaros, and a patio you can still use after dark. Built from brass and cast aluminum, because plastic doesn't last out here.
Why it matters
Desert yards go pitch black the second the sun drops.
Queen Creek sits on wide lots under dark skies. Once the sun is down, the front walk, the steps, and the pool deck all vanish. Most homes out here get one porch light and a flood on the garage.
Cheap fixtures don't survive this sun. Plastic housings go yellow and brittle in a few summers, and sprinkler overspray etches the lenses. Brass, copper, and cast aluminum shed heat and stay in service for years.
We design the layout before we buy a single fixture. Then we size the transformer, bury the wire, set the timer, and come back after dark to aim every light.
What's included
What a full yard system covers.
We walk the property with you at dusk and pick the spots worth lighting. Not every tree needs a light, and too many is the most common mistake we fix.
Path and step lighting
Low fixtures along walks and stairs, spaced so the pools of light overlap. No dark gaps to guess through.
Uplighting on palms and saguaros
Narrow beams up the trunk. A tall palm usually takes two fixtures, one on each side, so the crown reads full.
Pool and patio lighting
Light on the deck, under the bar, and in the ramada, so the back yard works after dinner.
Wall washing and stone work
Grazing light across stucco, veneer, and entry columns. It gives the house a shape at night.
Transformer sized with room to spare
We add up the load and stay under 80 percent of the rating. Running one flat out shortens its life.
Wire buried to code
Low-voltage cable goes at least 6 inches down, on a 120-volt circuit with ground-fault protection.
Timers and photocells
Lights come on at dusk and shut off at the hour you choose. No app needed unless you want one.
A night aiming visit
We come back after dark and adjust every beam. Aiming in daylight is a guess.
How it works
From first call to final walkthrough.
Garrison and Josh handle every project themselves, treat your home like their own, and keep you informed at every step.
- 01
Step One
Reach Out
Call or email us. Tell us about your project and we set a time that works for you.
Garrison: (480) 283-5007 · Josh: (480) 749-1384
- 02
Step Two
Get a Clear Estimate
We walk your project in person and price it before any work starts. No hidden fees, no surprise add-ons.
- 03
Step Three
We Get to Work
From a single fixture to a full custom wiring job, you get updates at every key stage.
- 04
Step Four
Final Walkthrough
We walk you through the finished work, answer every question, and leave your home spotless.
- 05
The Payoff
Saddle Up Rewards
Refer a friend who books a service and earn a $50 to $100 Amazon gift card as our thank you.
Why choose us
Built for 115 degrees and a July storm.
“The craftsmanship looked exceptional so I got their info. The install went quicker than expected and turned out exactly as planned!”
Desert-rated metal, not plastic
Brass, copper, and cast aluminum housings. Plastic goes brittle under this sun in a few summers.
Heat and monsoon in the plan
Splices get sealed, and fixtures stay out of the low spots that flood in a monsoon.
Owners walk the yard
Garrison and Josh plan the layout and set the final aim themselves, at night.
One clear price
You get the full quote before we dig. No line items added later.
FAQ
The questions homeowners ask us first.
Something we didn't cover? Call (480) 283-5007 and we'll walk you through it personally.
Heat shortens the life of any fixture. That is why we use brass and cast aluminum, which shed heat well. Plastic housings bake, fade, and crack.
Ready when you are
Experience the Southern Circuit Co. difference.
Wiring a custom build, planning a high-end remodel, or adding the lighting that finishes a space? Send the details and get a free, no-obligation estimate from the owners themselves.
Garrison (480) 283-5007 · Josh (480) 749-1384· Licensed & insured · Queen Creek, AZ